Yuma 4×4

Media and Communications

Is It Okay To Skip Gears In A Manual Transmission?

Is It Okay To Skip Gears In A Manual Transmission?

Hello, everyone and welcome! In this video we’re going to be answering the question: Is it ok to skip gears in a manual transmission? So by skip gears for example going from first gear to third gear or for example going from fifth gear down to second gear. Now this is a question I’ve seen pop up in the comments section so it’s something I thought I would address and you know we’re going to start with talking about up shifting then we’ll talk about down shifting and then finally get into starting from a stop. Now manual transmissions by design allow you to choose any gear any time, that doesn’t necessarily mean you should but by design they allow you to unlike sequential transmissions which force you to go 1, 2, 3, 4, 5, 6, 6, 5, 4, 3, 2, 1 in order to shift gears. Now for up shifting there’s really no problem if for example you’re let’s say you’re down in second gear and then you want to shift down to fourth gear the only thing you’re going to want to do is wait a little bit longer once you press the clutch in for those reps to drop because since you’re going into a taller gear you’re going to be at a lower RPM. If you release that clutch quickly what’s going to happen is the car is going to lurch so we can kind of show that as an example you’re in second you go to fourth quickly you can see there’s kind of a lurch there so that’s the engine and then the wheels trying to match speeds and so you get that lurch It’s going to cause a little bit of clutch wear and you know it could upset the balance of the car honestly, it’s not as big of a deal on up shifts as it is with downshifts and it’s certainly something you can do in fact Chevy with the Camaro SS if you’re in first gear, and you’re on low throttle and this is kind of an annoying thing that they do but they do it nonetheless, and it kind of proves a point in the SS if you’re in first gear low throttle you get up to a certain speed and you want to shift down into second it’ll actually force you into fourth gear to save fuel and it’s some you know emissions and fuel economy thing that they’ve done in order to get a better fuel economy rating perhaps, but regardless it’s fine to do now that same car you can of course if you’re flooring it it’ll let you go into second gear. It doesn’t force you into fourth every time but it proves you know, it’s totally fine to shift from first to fourth you just want to wait a little bit long or for the revs to drop. So what about downshifting? Let’s say you’re on the highway you’re traveling in sixth gear and you want to pass the car in front of you so you want to drop it down to fourth or perhaps third gear without going to the gears in between, totally fine to do the thing is you just want to make sure to rev match so you want to give it a little bit of throttle when you’re going down to that gear, bring it up to the RPM that that gear is going to be in and that way you don’t upset the balance of the car, and you know you have a nice smooth transition so for example going from second here Wait a bit for it down into the RPMs let it out in fourth and then from fourth give it some throttle put it down in the second gear so you’re skipping third there no issues doesn’t upset the car as long as you match the revs there. Do that one more time, second down to fourth let it drop for a good while this BMW has some rev hang so you have to wait quite a bit when you’re up shifting and then for that downshift give it throttle and down into second gear now if you don’t properly rev match what can happen is you’ll upset the balance of the car you can even lock up the rear wheels. So let’s say you’re driving on the track, you’re in a high-speed corner you’re in fifth gear and then you’re coming down to a low speed corner that maybe needs second gear if you go directly in that second gear and release the clutch without rev matching you may even lock up the wheels and I’ve even done that myself before, just kind of an amateur move you want to rev match that so that you don’t have set the balance of the car you don’t lock up those driven wheels whether that’s the rear or the front, and start to slide so you can easily upset the balance of the car if you’re driving really hard and you don’t rev match that downshift if you decide you know you’re going to skip gears and you’re also going to have additional clutch wear because what you’re doing is telling the engine to match that high speed that the clutch is spinning when you’re in a low gear, the clutch is of course geared to the transmission to the wheel so it’s spinning at a high speed the engines at a low speed you want to bring that engine speed up match the two and then you don’t have that imbalance and you won’t have that clutch where because the two speeds are matched when connect. Now our final scenario: Is it okay to skip a gear from a standstill? So if the car is stopped you’re not moving can you start and say second gear third gear, something like that now some automatics will actually choose to start in second gear in snow mode so in modes where it knows you have low traction it may start you off in second gear to reduce wheel spin. In a manual transmission honestly, it should be done with control in first gear it may be easier to prevent slip it’s not the end of the world though if you do want to start it in second gear it just means you’re going to have a bit more clutch wear because your engine in order to release the clutch fully to fully engage that clutch you have to have the car at a higher vehicle speed than if you were in first gear so in first gear for example starting off and I can fully release that looks to be about you know maybe 5 or 6 miles per hour now if we try that starting in second gear I can’t fully release the clutch until about maybe eight or nine miles per hour there and so you’re getting into a higher speed that means you’re going to have a bit more clutch wear in order to do it it’s okay if you’re in a super slippery scenario, and you can’t prevent yourself from spinning those tires, but really in a manual transmission you’re going to want to just be able to control it more in first gear, that’s a better bet, okay, if you have to do it, and you really shouldn’t be trying to start in a gear higher than second gear there’s really no reason to do that, and you’re just going to have excessive clutch wear. So thank you guys for watching if you have any questions, or comments feel free to leave them below, i’ll include some links in the video description. I’ve got a bunch of different videos about rev-matching heel-and-toe downshifting double clutching that kind of thing if you’re interested.

100 thoughts on “Is It Okay To Skip Gears In A Manual Transmission?

  1. Some additional things to think about! First off, obviously you should never downshift if it means exceeding your engine's redline. Also, skipping gears will put an additional strain on your synchronizers, especially for downshifts. Not that double-clutching is required these days (though if done properly, it will save your synchros), but it can help for getting into first gear if you're moving. If you're traveling at say 15 mph/25km/h, and want to be in first, generally the transmission will prevent you from doing so. Let the clutch out, pop the revs up, then clutch in and shift to first – this will often work. Generally not necessary for getting into other gears, again, that's why synchros exist is to ease and allow for that transition. Hope everyone's having a great day!
    Consider following on Instagram: https://www.instagram.com/engineeringexplained/

  2. This might be a bit obvious to you lot, but you can start a manual quite easily in second if you start facing down a hill and let it get up to speed by just rolling.

  3. I don't really understand people who drive automatic. I would just have fallen asleep on the wheel if i drove that it is boring asf

  4. I don’t know if it’s normal but when I’m shifting into gears (up and down) I’ll gently push it into the gear I want and it will pop in whenever it’s at a revving it likes. And I’ve found it’s the smoothest transition. Although for shifting up I know the speeds it likes. And I don’t really punch the accelerator unless overtaking. Anyway, regarding the first part, is this wearing on my car?

    And I don’t have RPM’s on my dash either. So I just have to feel my car.

  5. you are wrong, this is damaging to your synchros. Many cars need to have transmission work because of this.

  6. The truck driver told me they shifting high gear (3, 4 or 5) to R of their truck can not climb a slope and start goingvdown. The R make the truck goingvdown slower

  7. Here in my country, in buses, there are written warnings to the driver to avoid skipping 1st gear. I guess the torque of the engine allows this but I guess the damage it can cause makes it a bad habit.

  8. I take off in 3rd or 4th gear depending on if there's anything in the trailer, 5th if I'm bobtail.

    I also only use the clutch for starting and stopping, you gotta love floating gears.

  9. I skip it occasionally,it depending by your engine Rev and the speed matching by the actual road conditions.

  10. Please please please do a video on manual transmission daily driving driving over speed bumps, chunky roads, slow driving and fast driving.. and maybe some technique, petals and seating position and such👍👍 the way you explain things is perfect would really help a brother out LOL

  11. Isn't that the point of a manual transmission? I go from 4 to 2 all the time when making a turn onto another street.

  12. Nonsense!Downshifting from say 5 to 3 is easily done while slightly getting the clutch pedal up until its fully on!That way you can brake without the brake pedal.Don't need to get revs equal.This typical from a person who doesn't drive a manual daily.And no,i never had a clutch replaced because of to much wear.When i hear about automatic transmissions that had to be replaced after 10 year and cost a lot of money i will never have a automatic!I never had to replace a transmission!Its so much more reliable!

  13. In the city I always shift 1, 2, 4. Downshift I do according to the speed, e.g. I slow down from 4 I have no problems to shift to 2 for to speed up again.

  14. 5:13 bro you can use second gear just rev abit more like 2k than feather it until you feal the gas than let go

  15. Hey kid . Go and learn better how to drive . I can shift what i want up and down . The problem is just calculating speed and rpms

  16. There is no problem. I always used to skip. Now for the past eight years I haven't seen a manual transmission car.

  17. On my hino truck i always skip the 1st gear except when emergency or i start on a hill. Also you can't downshift from 2nd to 1st without stopping first

  18. Most vans used for commercial purposes example ; Toyota Hiace. Without any carrying weight you start in 2nd gear not first. First is only designed to be used when vehicle has mass. Yet I see so many drivers without this basic knowledge. Several years back NISSAN (Infinity) 350z came out with gearbox's that when you pressed on the clutch the revs would equal the gear you choose. This made shift time quicker with less wear and tear.

  19. In my country having an Automatic transmission is everyones DREAM
    We even have the driving tests with Manual transmission cars
    And 99.9 % of the cars are Manual
    Seeing you all acting like Manual transmission is a big deal , is very funny
    Not to lie , but I actually Laughed😅
    Because WE say the exact same thing about Automatic Transmission cars
    And it's not just this
    In my country 99% of the cars does'nt have the 6th gear
    We are limited to 5
    Life is very simple here
    Very much

  20. Man … can u explain what's the difference between clutch speed and engine speed ?
    Thanks in advance …

  21. He really needs to stop saying ‘shift DOWN’ from 4th to 2nd when it’s clearly up. As a new driver it’s making it more tricky to understand when you’re already dealing with revs and other new concepts.

  22. Camaro SS also has auto rev match. Literally don't think I'll ever buy a manual car without it. It's awesome.

  23. For how smart you are and how much knowledge you have on cars I'm surprised you went out and bought a heavy and over-engineered BMW that's just gonna have something break within a year and be very expensive to replace

  24. Remember, if you take off in 2nd gear and do it correctly, you will save on using the clutch an additional time. You will use the clutch less times overall to reach full speed. I think EE fails to address that.

  25. Excellent and properly explained video. I also had this doubt while I used to drive but now I'm aware of what to do! Great job!! 👍

  26. What happens when you use downshifting for braking purposes? Let’s say you’re cruising in 4th gear at 2100 rpm (60kph) and want to slow down to around 30kph. You press the clutch and downshift to 2nd gear, but then you slowly release the clutch until the RPMs stabilize. Does that do any harm to the transmission?

  27. Automatic transmission in truck is actually a standard that is shifted by computer. It will skip gears as it sees the load change. Why isn't this kind of transmission available in light trucks and cars?

  28. In my country a lot of people shift down after standing meaning from third/fourth to first when standing. That is not good.

  29. In 3/4 or 1 ton trucks that have a diesel with a 6 or 5 speed you're susposed to start in 2nd because 1st is usually a tow or crawling gear even older gas trucks that have a 4 on the floor you can start 2nd because again if you're towing a heavy ass load or mud bogging or something then you'll want that torque but you dont want to shift 3 times just to pull out of a stop light

  30. Its easy to understand your explanation, but one thing is the changing of gear is little hard to see, cause the placement of your backside camera is not right at all to view the changes of gear

  31. I would only use for downshifr as if jr car brakes are fucked u can down shift to 1 instantly to slow down so I dont rhinknits that deep

  32. i had one honda who wanted to race on highway (just cruising and he just came up to me like heyy lets race)but we were about 80 kph both were 2nd gear but when he needed to shift to 3rd instead got to 5th his transmission let go
    So how do you explain that??

  33. Блять, ну спасибо, попробовал так на батиной семёрке, в итоге машина выплюнула коробку, батя дал пизды и сдал в детдом, ахуеть, лайфхак топ, автор идет нахуй!

  34. If the opponent seems very strong, its ok to skip the second gear and go straight to gear third and if you are feeling special ,go all the way to snake man mode

  35. I doubt anybody gone see this but I started YouTube a couple weeks ago. Hope I can get some support🙏🏾

  36. what if i'm driving in the 4th gear and and the light ahead turns red. then, as opposed to downshifting one gear step i.e. 4 – 3 – 2 – 1 – N, I simply shift to neutral directly, then release the clutch, and control my stop with the break. what are the consequences of doing that?

  37. I am interested: Which car, in means of fuel economy and total cost of ownership, would you recommend for:
    – commuting 160 km per day,
    – 95% Autobahn (greetings from Germany :-))
    – Average speed 130 km/h

    I really enjoy watching your channel and would appreciate your recommendation.

  38. I don't understand you language…
    shift from 2 down to 4…
    and what's most weird 'let's upshift from 2 down to 4'…. duuuude! ;D

  39. Try with a rental car,get use to it, listen to the engine, not just watch tack.
    Use your buddy's car, not to wreck yours.

  40. The wear and tear, Transmission synchronize shifting FROM gear to gear, in steps UP and down, professional Drivers practicing daily. 👍

  41. I used to go from 2nd to 4th in my old VW bug all the time because it wouldn't go into 1st or 3rd. It ran that way for like 2 years.

  42. Most autos allow 2nd gear start if you select 2. I dont want to say all but every car Ive owned all the way back to my 1990 Lumina had second gear start.

Leave comment

Your email address will not be published. Required fields are marked with *.